To do the Factory reset press the switch which present at the back of your ADSL Router respectively. You have to hold down that reset button and watch the status Led on the front of the unit. When it goes off leave the reset button and after a time interval of about 20 seconds the led light will come back and then you should move to access the router using the default IP address of your ADSL Router which is 192.168.1.1.

To do Factory reset process go to the below steps

Factory reset using the reset button

  • Go to a web browser, write IP address of your respective ADSL Router (default is 192.168.1.1) then select Enter.
  • Enter your ADSL Router Login name and password which is normally default i.e. admin/admin). then login.
  • Go to Tools tab on the top of the page. Go to System Commands on your left.
  • Press Restore button to factory reset on the unit.